DG-CLC-2023

Extruded Aluminum Duo Heat Transfer Plates – For use in radiant floor heating via joist space applications (under sub-floor) with either 3/8” or 1/2” PEX tubing. Plates are 3-1/2” x 4’ long and pre-drilled for wood screws to attach underneath the sub-floor. PEX tubing is held securely in the tube channel of the plate. 800-363 3-1/2” x 4' For 3/8” and 1/2”Tube 20 1 Spider Mesh Panels – A low thickness radiant floor system used to hold tube in place during installation. The perforated panel design allows the panel to be installed over sand, cement, and self-leveling substrates. 800-SM100 For 1/2”Tube Self-Adhesive Panel Our duo heat transfer plates help evenly distribute heat in radiant floor applications. The rigid extruded aluminum channels tightly grip tube while offering exceptional heat transfer performance without expansion noise. Designed for installation in sub-floor joist spaces, these 48” long plates have eight pre-drilled screw holes to make mounting easier. This also makes them an excellent option for both new and retrofit radiant hydronic projects. These plates accept PEX, PEX-AL-PEX, PE-RT, and copper tubing without the need for additional fasteners or adhesives. The channels are on the underside of the plates, so you can install tube after the plates have been mounted. With grooves for either 3/8” or 1/2” tube, our duo heat transfer plates are ready for any job. Key Features at a Glance: • Channels are compatible with 3/8” and 1/2” tube • Tube is held on the underside of the plate. • Eight pre-drilled screw holes Extruded Aluminum Duo Heat Transfer Plate Radiant Hydronic Systems - Duo HeatTransfer Plates Certifications Part No. Size Configuration Model Cs. Ct. Duo Heat Transfer Plates Spider Mesh Panels Spider Mesh Panels 314 | legendvalve.com | LT-CLC-2023 RADIANT HYDRONIC SYSTEMS