DG-CLC-2023

Floating Action Mixing Control – An outdoor reset control designed to operate a 24 V (ac) floating action 2, 3, or 4-way valve. 800-T360 Floating Mixing Controller N/A 1 Set-Point Controller – A controller with a digital display and a remote sensor. Pulse width modulation control logic is provided for slow responding systems. 800-T150 Set-Point Control 150, * 1-Stage 1 Floating Set-Point Controller – A controller with a floating action output intended to operate an actuating motor for valves or dampers. Used for heating applications to maintain a set supply water or air temperature. 800-T153 Floating Set-Point Controller N/A 1 Floating Action Mixing Controller The Floating Action Mixing Controller is designed to operate a mixing valve using Outdoor Temperature Reset. It can be used in applications ranging from in-floor radiant to commercial baseboard systems for Boiler Return Protection with full reset. This control regulates a single heating water temperature through Mixing Outdoor Reset. It controls the mixing by opening or closing a floating action type mixing valve actuator (3 or 4 way valves), and also provides control of the mix system pump. Key Features at a Glance: • Quick setup for easy installation and programming of control • Test sequence to ensure proper component operation • Advanced settings to fine-tune building requirements • Powered mixing system pump output Floating Set-Point Controller Set-Point Controller Mixing & Set-Point Controllers Controllers &Thermostats - Radiant Hydronic Systems *Special order item. May be subject to different order terms & conditions. Part No. Model Configuration Qty. | 353 P: 800.752.2082 | # 14 13 12 11 10 9 8 7 5 4 3 1 6 2

RkJQdWJsaXNoZXIy OTA1MTgx