DG-CLC-2023

Snow Melting Controller – Designed to operate electric or hydronic equipment to melt snow or ice from any surface including driveways, walkways, patios, business entrances, parking ramps, loading docks, and more. Controlled automatically to reduce operating energy costs. 800-T654 SIM Controller* 1 Snow & Ice Sensor – Automatically detects snow or ice on a driveway or walkway. The Snow & Ice Sensor is an in ground sensor used with snow melting controls to automatically detect snow or ice on a driveway or walkway. 800-T090 Snow & Ice Sensor* 65’ Cable 1 800-T091 Snow & Ice Sensor Socket* 1 800-T095 Aerial Mounted Snow Sensor* 1 Slab Sensor – Designed to measure temperature in outside snow melting slabs. Features an HDPE sleeve to allow use in conduits, soils, concrete, and direct burial. 800-T079 Slab Sensor 10’ Cable 1 800-T072 Slab Sensor 20’ Cable 1 800-T073 Slab Sensor 40’ Cable 1 Snow & Ice Melt (SIM) Controller Snow & Ice Sensor The Snow Melting Controllers are designed to operate electric or hydronic equipment to melt snow or ice from any surface including driveways, walkways, patios, business entrances, parking ramps, loading docks, and more. The surface temperature for snow melting is controlled automatically to reduce operating energy costs. An automatic start and stop function when used with Snow & Ice Sensors. Automatic start with a timed stop is available when used with the Aerial Snow Sensor. This SIM Controller can operate a dedicated hydronic boiler or a mixing device. Isolation relays are required to operate line voltage pumps. Key Features at a Glance: • Automatic Snow / Ice Detection • Supports Both Inslab & Retrofit Aerial Sensors • Programmable Schedule Slab Sensor T-091 T-090 T-095 Radiant Hydronic Systems - Controllers &Thermostats Snow & Ice Melt (SIM) Controllers *Special order item. May be subject to different order terms & conditions. Part No. Model Configuration Qty. 352 | legendvalve.com | LT-CLC-2023 RADIANT HYDRONIC SYSTEMS